Display DHCPv6 Relay Information

You can use show commands to display information about DHCP relay statistics, relay addresses for a device, and relay addresses for an interface.

1. Access privileged EXEC mode on a device where DHCPv6 relay is configured.
2. Display all DHCP relay addresses configured on the device.
   

   device# show ipv6 dhcp relay address
   DHCPv6 unique identifier(DUID): 0102f8f10027f8d43dfb
   Interface           Relay Address           VRF Name            Outgoing Interface
   ---------           -------------           --------            ------------------
   eth 1/17             2002::10               default-vrf
   eth 1/17             2000::10               default-vrf         eth 0/9
   eth 1/17             2019::10               test                ve 102
   ve 94                2011::10               default-vrf
   

3. Display all DHCP relay addresses configured for a specific interface on the device.
   

   device# show ipv6 dhcp relay address interface ethernet 1/40
   DHCPv6 unique identifier(DUID): 01021025768ef804e005
   Interface           Relay Address            VRF Name            Outgoing Interface
   ---------           -------------            --------            ------------------
   Eth 1/40             2019::10                default-vrf
   

4. Display statistics such as the number of packets dropped, received, and sent.
   

   device# show ipv6 dhcp relay statistics
   DHCPv6 Relay Statistics
   ------------------------
   Packets dropped : 0
     Error : 0
   Packets received : 60
     SOLICIT : 6
     REQUEST : 6
     CONFIRM : 0
     RENEW : 2
     REBIND : 0
     RELEASE : 6
     DECLINE : 0
     INFORMATION-REQUEST : 0
     RELAY-FORWARD : 0
     RELAY-REPLY : 40
   Packets sent : 60
     RELAY-FORWARD : 20
     REPLY : 40