show ipv6 ospf interface
Show the IPv6 OSPFv3 interface configuration.
Syntax
-
show ipv6 ospf interface
[gigabitEthernet {slot/port[sub-port]}] [vlan <1-4059>]
-
show ipv6 ospf interface
[vrf WORD<1-16>] [vrfids WORD<0-512>]
-
show ipv6 ospf interface
vrf WORD<1-16>
-
show ipv6 ospf interface
vrfids WORD<0-512>
Command Parameters
- {slot/port[sub-port]}
- Identifies a single slot and port.
If your platform supports channelization and the port is channelized, you must
also specify the sub-port in the format slot/port/sub-port.
- vlan <1-4059>
- Specifies the VLAN ID in the range
of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system
reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling and
SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the
default VLAN and you cannot create or delete VLAN ID 1.
- vrf <WORD 1-16>
- Specifies the VRF name.
- vrfids <WORD 0-512>
- Specifies VRF IDs.
