show ip dhcp-relay

Display relay information to show relay information about Dynamic Host Configuration Protocol (DHCP) routes and counters.

Syntax

show ip dhcp-relay counters
show ip dhcp-relay counters [option82] [vrf WORD<1-16>] [vrfids <0-512>]
show ip dhcp-relay counters option82
show ip dhcp-relay counters vrf WORD<1-16>
show ip dhcp-relay counters vrfids WORD<0-512>
show ip dhcp-relay fwd-path
show ip dhcp-relay fwd-path [vrf WORD<1-16>] [vrfids <0-512>]
show ip dhcp-relay fwd-path vrf WORD<1-16>
show ip dhcp-relay fwd-path vrfids WORD<0-512>
show ip dhcp-relay interface
show ip dhcp-relay interface [vrf WORD<1-16>] [vrfids <0-512>]
show ip dhcp-relay interface gigabitethernet
show ip dhcp-relay interface gigabitethernet [{slot/port[-slot/port][,...]}][<1-4059>] [vrf WORD<1-16>] [vrfids <0-512>]
show ip dhcp-relay interface gigabitethernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
show ip dhcp-relay interface gigabitethernet vrf WORD<1-16>
show ip dhcp-relay interface gigabitethernet vrfids WORD<0-512>
show ip dhcp-relay interface vlan
show ip dhcp-relay interface vlan <1-4059>
show ip dhcp-relay interface vrf WORD<1-16>
show ip dhcp-relay interface vrfids WORD<0-512>

counters: Displays the count of DHCP Relay requests and replies.
fwd-path: Displays information about DHCP Relay forward paths.
gigabitethernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}: Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If your platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
interface: Specifies the interface.
option82: Shows statistics for the relay agent option.
vlan <1-4059>: Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling and SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.
vrf WORD<1-16>: Specifies the name of the VRF.
vrfids <0-512>: Specifies the ID of the VRF. The value is an integer in the range of 0 to 512.

None

User EXEC