show ipv6 fhs status
Displays the IPv6 First Hop Security (FHS) status information.
Command Parameters
- vlan <1-4059>
- Displays status of IPv6 DHCP
snooping and ND inspection status on a particular VLAN. Specifies the VLAN ID in
the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the
system reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling
and SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the
default VLAN and you cannot create or delete VLAN ID 1.