poe poe-pd-detect-type

Configure the PD detection mode.

Syntax

Command Parameters

802dot3af
Sets PD detection mode in 802.3af.
802dot3af_and_legacy
Sets PD detection mode in 802.3af and legacy.
802dot3at
Sets PD detection mode in 802.3at.
802dot3at_and_legacy
Sets PD detection mode in 802.3at and legacy.
poe poe-pd-detect-type 802dot3bt
Sets PD detection mode in 802dot3bt.
802dot3bt_type3
Sets PD detection mode in 802.3bt Type 3 (60W).
802dot3bt_type4
Sets PD detection mode in 802.3bt Type 4 (90W).

Default

The default is 802dot3at_and_legacy.

Command Mode

Global Configuration

Usage Guidelines

The 802dot3bt_type3 parameter applies only to VSP4900-12MXU-12XE and 5520 Series.

The 802dot3bt_type4 parameter applies only to 5520 Series.

This command does not apply to all hardware platforms. For more information about feature support, see VOSS Feature Support Matrix.