eapol

Syntax

• default eapol enable

• default eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} supplicant-timeout

• default eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} transmit-interval

• default eapol supplicant-timeout

• default eapol transmit-interval

• eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} fail-open-vlan <1-4059>

• eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} guest-vlan <1-4059>

• eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} max-request <1-10>

• eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} quiet-interval <1-65535>

• eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} supplicant-timeout <1-65535>

• eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} supplicant-timeout <1-65535>

• eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} transmit-interval <1-65535>

• eapol status authorized

• eapol supplicant-timeout <1-65535>

• eapol transmit-interval <1-65535>

• no eapol enable

Command Parameters

fail-open-vlan <1-4059>

Specifies the fail open VLAN ID.

guest-vlan <1-4059>

Specifies the guest VLAN ID.

max-request <1-10>

Specifies the maximum number of attempts to send the packet to the supplicant.

quiet-interval <1-65535>

Specifies the time in seconds to wait bewteen authentication falure and start of a new authentication.

supplicant-timeout <1-65535>

Specifies the time in seconds to wait for response from supplicant for all EAP packets except EAP Request/Identity.

transmit-interval <1-65535>

Specifies the time in seconds to wait for response from supplicant for EAP Request/Identity packets.

Default

None

Command Mode

GigabitEthernet Interface Configuration