vlan ports
Modify VLAN port settings.
Syntax
-
vlan ports {slot/port[/sub-port][-slot/port[/sub-port]][,...]} tagging tagAll
-
vlan ports {slot/port[/sub-port][-slot/port[/sub-port]][,...]} tagging untagAll
Command Parameters
- {slot/port[/sub-port]
[-slot/port[/sub-port]] [,...]}
-
Identifies the slot and port in one
of the following formats: a single slot and port (slot/port), a
range of slots and ports (slot/port-slot/port), or a series of
slots and ports (slot/port,slot/port,slot/port). If the platform
supports channelization and the port is channelized, you must
also specify the sub-port in the format slot/port/sub-port.
- <LINE>
- Port list
- disable
- Disable tagging on this port
- enable
- Enable tagging on this port
- filter-unregistered-frames {disable | enable}
- Enable/disable filtering of
unregistered frames
- filter-untagged-frame {disable | enable}
- Enable/disable filtering of
untagged frames
- name <LINE>
- Set VLAN port name
- priority <0-7>
- Set VLAN port priority
- pvid <1-4094>
- Change PVID
- tagAll
- Enable tagging on this port
- tagging {disable | enable | tagAll | tagPvidOnly | untagAll | untagPvidOnly}
- Enable/disable tagging
- tagPvidOnly
- Enable tagging of packets matching
the
- untagAll
- Disable tagging on this port
- untagPvidOnly
- Disable tagging of packets
matching the Pv
Command Mode
Global Configuration
