show ip mroute interface
Display information about the interface for the multicast routes set up on the switch. The
range of values depends on the hardware platform.
Syntax
-
show ip mroute
interface
-
show ip mroute interface
gigabitethernet
-
show ip mroute interface
gigabitethernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
-
show ip mroute interface
vrf WORD<1-16>
-
show ip mroute interface
vrf WORD<1-32>
-
show ip mroute interface
vrfids WORD<0-255>
-
show ip mroute interface
vrfids WORD<0-512>
Command Parameters
- gigabitethernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
- Identifies the slot and port in
one of the following formats: a single slot and port (slot/port), a range of slots
and ports (slot/port-slot/port), or a series of slots and ports
(slot/port,slot/port,slot/port). If your platform supports channelization and the
port is channelized, you must also specify the sub-port in the format
slot/port/sub-port.
- vrf WORD<1-32> | vrf WORD<1-16>
- Specifies a VRF by name. Range
depends on hardware platform.
- vrfids WORD <0-255> | vrfids WORD <0-512>
- Specifies a VRF ID. Range depends
on hardware platform.
