Displays the configuration of the TCP maximum segment size (MSS) adjustment functionality on the switch.
show isis tcp adjust-mss
None.
User EXEC
This command only applies to XA1400 Series.
The show isis tcp adjust-mss command displays the following information:
Output field |
Description |
---|---|
ENABLE |
Displays if the MSS adjustment functionality is enabled on the switch. |
STATUS |
Displays the activation status of the MSS adjustment functionality. The MSS adjustment functionality only activates when at least one FE tunnel with a maximum transmission unit (MTU) greater than or equal to 1500 is configured. |
TCP MSS TYPE |
Displays if the MSS adjustment value is manually configured or auto-derived. |
TCP MSS VALUE |
Displays the MSS adjustment value. |
The following example displays the TCP MSS adjustment configuration.
Switch:1>show isis tcp adjust-mss ================================================================================ ISIS TCP Adjust MSS ================================================================================ ENABLE STATUS TCP MSS TCP MSS TYPE VALUE -------------------------------------------------------------------------------- TRUE ACTIVE MANUAL-CONFIG 1100