filter acl ace ip

Syntax

• default filter acl ace ip <acl-id> <ace-id>

• filter acl ace ip <acl-id> <ace-id> dscp eq <0-63 | 0-63>

• filter acl ace ip <acl-id> <ace-id> dst-ip eq {A.B.C.D}

• filter acl ace ip <acl-id> <ace-id> dst-ip mask {A.B.C.D} <0-32>

• filter acl ace ip <acl-id> <ace-id> dst-ip mask {A.B.C.D} {A.B.C.D}

• filter acl ace ip <acl-id> <ace-id> dst-ip range {A.B.C.D} {A.B.C.D}

• filter acl ace ip <acl-id> <ace-id> ip-frag-flag eq { noFragment | anyFragment }

• filter acl ace ip <acl-id> <ace-id> ip-options any

• filter acl ace ip <acl-id> <ace-id> ip-protocol-type eq WORD<1-256>

• filter acl ace ip <acl-id> <ace-id> src-ip eq {A.B.C.D}

• filter acl ace ip <acl-id> <ace-id> src-ip mask {A.B.C.D} <0-32>

• filter acl ace ip <acl-id> <ace-id> src-ip mask {A.B.C.D} {A.B.C.D}

• filter acl ace ip <acl-id> <ace-id> dscp mask <0-63 | 0-63> <0-0x40 | 0x0-0x0>

• filter acl ace ip <acl-id> <ace-id> dst-ip eq WORD <1-1024>

• no filter acl ace ip <acl-id> <ace-id> dscp

• no filter acl ace ip <acl-id> <ace-id> dst-ip

• no filter acl ace ip <acl-id> <ace-id> ip-frag-flag

• no filter acl ace ip <acl-id> <ace-id> ip-options

• no filter acl ace ip <acl-id> <ace-id> ip-protocol-type

• no filter acl ace ip <acl-id> <ace-id> src-ip

• no filter acl ace ip <acl-id> <ace-id>

Command Parameters

<ace-id>

Specifies the ACE ID. Different hardware platforms support different ACE ID ranges. Use the CLI Help to see the available range for the switch.

<acl-id>

Specifies the ACL ID. Use the CLI Help to see the available range for the switch.

dscp <eq|mask> WORD <0-256>

The <eq|mask> parameter specifies an operator for a field match condition. The equals to parameter specifies the PHB name or DSCP value {0 to 256, where 256 => disable}, or:

• phbcs0

• phbcs1

• phbaf11

• phbaf12

• phbaf13

• phbcs2

• phbaf21

• phbaf22

• phbaf23

• phbcs3

• phbaf31

• phbaf32

• phbaf33

• phbcs4

• phbaf41

• phbaf42

• phbaf43

• phbcs5

• phbcs6

• phbef

• phbcs7

dst-ip <eq|mask> WORD <1-1024>

The <eq|mask> parameter specifies an operator for a field match condition.

The WORD<1-1024> parameter specifies the destination IP address list in one of the following formats:

• a.b.c.d

• [w.x.y.z-p.q.r.s]

• [l.m.n.o/mask]

• [a.b.c.d/len]

ip-frag-flag eq <noFragment|anyFragment>

The eq parameter specifies an operator for a field match condition: equal to.

The ip-frag-flag parameter specifies a match option for IP fragments: noFragment or anyFragment.

ip-options any

Matches to an IP option. Any is the only option.

ip-protocol-type <eq> WORD <1-256>

The <eq> parameter specifies an operator for a field match condition: equal to.

The WORD<1-256> parameter specifies one or more IP protocol types:

• (1-256)

• icmp

• tcp

• udp

• ipsecesp

• ipsecah

• ospf

• vrrp

• undefined

src-ip <eq|mask> WORD <1-1024>

The <eq|mask> parameter specifies an operator for a field match condition: equal to, not equal to, less than or equal to, greater than or equal to.

The WORD<1-1024> parameter specifies a source IP address list in one of the following formats:

• a.b.c.d

• [w.x.y.z-p.q.r.s]

• [l.m.n.o/mask]

• [a.b.c.d/len]

Default

None

Command Mode

Global Configuration