show slpp-guard
View SLPP Guard configuration status for the switch or a specific list of ports.
Command Parameters
- {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}
- Identifies the slot and port in
one of the following formats: a single slot and port (slot/port), a range of slots
and ports (slot/port-slot/port), or a series of slots and ports
(slot/port,slot/port,slot/port). If your platform supports channelization and the
port is channelized, you must also specify the sub-port in the format
slot/port/sub-port.
