ip ospf authentication-type (for a
VLAN)
Configure the OSPF authentication type for the VLAN. If you choose simple, you must
configure the password with the ip ospf authentiation-key WORD<0-8> command. If you
choose MD5, you must configure the MD5 key with the ip ospf message-digest-key
<1-255> md5 WORD<0-16> command.
Syntax
-
default ip ospf
authentication-type
-
ip ospf
authentication-type message-digest
-
ip ospf
authentication-type none
-
ip ospf
authentication-type sha-1
-
ip ospf
authentication-type sha-2
-
ip ospf
authentication-type simple
-
no ip ospf
authentication-type
Command Parameters
- message-digest
- Configures the authentication-type
to message-digest. If you choose MD5, you must configure the MD5 key with the ip
ospf message-digest-key <1-255> md5 WORD<0-16> command. Message Digest
5 (MD5) provides standards-based authentication using 128-bit encryption. If you
use MD5, each OSPF packet has a message digest appended to it. The digest must
match between sending and receiving routers, or the packet is discarded.
- none
- Configures the authentication-type
to none.
- sha-1
- Configures the authentication-type
to secure hash algorithm 1 (SHA-1). SHA-1 provides standards-based authentication
using 128-bit encryption.
- sha-2
- sha-2—Specifies SHA-2, which
offers the hash function SHA-256.
Note
The command parameter sha-2, an update of SHA-1, can offer six hash
functions that include SHA-224, SHA-256, SHA-384, SHA-512, SHA-512/224,SHA
512/256, with hash values that are 224, 256, 384, or 512 bits. However, the
current release supports only SHA-256.
- simple
- Configures the authentication-type
to simple, which is a simple-text password. Only routers that contain the same
authentication ID in their LSA can communicate with each other. Using this
security mechanism is not recommended. If you choose simple, you must configure
the password with the ip ospf authentiation-key WORD<0-8> command.
Command Mode
VLAN Interface Configuration