The following sections detail what is new in this document.
The following commands are newly added to this document:
5520 Series:
Auto-sense:
CA Certificate Authentication for IPsec:
Dynamic Nickname Assignment:
EAPoL enhancements:
IP Phone Support
IPsec compression:
SSH:
TCP Maximum Segment Size (MSS) adjustment:
Universal Plug and Play (uPnP) Filtering:
The following commands are updated in this document:
Command |
Update |
---|---|
boot config sio console baud |
Added 5520 Series default. |
certificate ca |
Added SHA-256 fingerprint parameter. |
eapol |
Added new parameters. |
i-sid |
Added Usage Guidelines. |
i-sid (for a VRF) |
Added Usage Guidelines. |
ike policy WORD<1–32> pre-shared-key |
Added FIPS information. |
ip address (on a VLAN) |
Added Usage Guidelines. |
ip ipfix aging-interval |
Added 5520 Series default. |
ip route (globally) |
Added Usage Guidelines. |
load-license |
Added Usage Guidelines. |
mac-security limit-learning |
Added Usage Guidelines. |
poe poe-pd-detect-type |
Added IEEE 802.3bt Type 3 and Type 4. |
run spbm |
Added Usage Guidelines. |
set ipsec <1-255> |
Added new parameter for authentication type. |
show interfaces gigabitEthernet i-sid |
Updated output example. |
show interfaces loopback |
Added Usage Guidelines. |
show ip ipfix flows |
Added new parameters for 5520 Series. |
show i-sid |
Added Usage Guidelines, updated output fields, and updated example. |
snmp-server user |
Added new syntax and updated command parameter. |
web-server |
Added new syntax and updated command parameter. |
The following commands are removed:
boot config flags factorydefaults fabric