show ip source binding
Displays the IPv4 addresses that are allowed on all IP Source Guard enabled ports or for a
specified port.
Syntax
-
show ip source
binding
-
show ip source binding
{A.B.C.D}
-
show ip source binding
interface gibabitEthernet
-
show ip source binding
interface gigabitEthernet
{slot/port[/sub-port][-slot/port[/sub-port]][,...]}
-
show ip source binding
vlan <1-4059>
-
show ip source binding vrf
WORD<1-16>
-
show ip source binding
vrfids WORD<0-512>
Command Parameters
- {A.B.C.D}
- Displays the IP Source Guard
address bindings for the specified IPv4 address.
- interface gigabitEthernet
{slot/port[/sub-port][-slot/port[/sub-port]][,...]}
- Displays the IPv4 addresses that
are allowed on the specified IP Source Guard port.
- vlan <1-4059>
- Specifies the VLAN ID in the range
of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system
reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling and
SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the
default VLAN and you cannot create or delete VLAN ID 1.
- vrf WORD<1-16>
- Displays the IP Source Guard
address bindings list for a specific vrf.
- vrfids WORD<0-512>
- Displays the IP Source Guard
address bindings list for a specific vrf id.
