l2 tracemroute
Trigger a Layer 2 multicast traceroute. Enable Connectivity Fault Management (CFM) to debug
Layer 2.
Syntax
-
l2 tracemroute source
{A.B.C.D} group {A.B.C.D}
-
l2 tracemroute source
{A.B.C.D} group {A.B.C.D} priority <0-7>
-
l2 tracemroute source
{A.B.C.D} group {A.B.C.D} ttl-value <1-255>
-
l2 tracemroute source
{A.B.C.D} group {A.B.C.D} vlan <1-4059>
-
l2 tracemroute source
{A.B.C.D} group {A.B.C.D} vrf WORD<1-16>
Command Parameters
- group {A.B.C.D}
- Specifies the multicast group
address.
- priority <0-7>
- Specifies the priority. The
default is 7.
- source {A.B.C.D}
- Specifies the source address.
- ttl-value <1-255>
- Specifies the time-to-live value
for the trace.
- vlan <1-4059>
- Specifies the VLAN ID in the range
of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system
reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling and
SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the
default VLAN and you cannot create or delete VLAN ID 1.
- vrf WORD<1-16>
- Specifies the VRF name.
