filter acl

Syntax

• default filter acl <acl-id>

• default filter acl <acl-id> enable

• default filter acl <acl-id> name

• filter acl <acl-id> enable

• filter acl <acl-id> name WORD<0-32>

• filter acl <acl-id> type <inVlan | inPort | outPort |inVsn>

• filter acl <acl-id> type <inVlan | inPort | outPort |inVsn> name WORD<0-32>

• filter acl <acl-id> type <inVlan | inPort | outPort |inVsn> pktType ipv6

• filter acl <acl-id> type inVsn matchType <both | terminatingNNIOnly | uniOnly>

• filter acl <acl-id> type inVsn matchType <both | terminatingNNIOnly | uniOnly> pkType ipv6

• no filter acl <acl-id>

• no filter acl <acl-id> enable

Command Parameters

<acl-id>

Specifies the ACL ID. Use the CLI Help to see the available range for the switch.

matchType <both | terminatingNNIOnly | uniOnly>

For inVsn ACL types, specifies the type of port to associate with the ACL.

name WORD<0-32>

Specifies an optional descriptive name for the ACL.

pktType ipv6

Specifies the packet type as IPv6.

type <inVlan|inPort|outPort|inVsn>

Specifies the access control list (ACL) type. The values inVlan, inPort, and inVsn are ingress ACLs, and outPort is an egress ACL.

Default

None

Command Mode

Global Configuration