show interfaces gigabitethernet error

Syntax

• show interfaces GigabitEthernet error [{slot/port[/sub-port][-slot/port[/sub-port]][,...]}]

• show interfaces GigabitEthernet error collision {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

• show interfaces GigabitEthernet error ospf {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

• show interfaces GigabitEthernet error verbose {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

Command Parameters

{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

collision

Show port collision error information.

ospf

Show port ospf error information.

verbose

Show port error information. Display priority-based flow control pause transmit and receive counter.

Default

None

Command Mode

Privileged EXEC

Usage Guidelines

On XA1400 Series, the command output for most columns shows values of zero (0). To see port-level error counters. use the show io nic-counters command instead. For more information, see show io