Shows the IP configuration for an interface.
show ip interface
show ip interface gigabitethernet
show ip interface gigabitethernet <1-4059>
show ip interface gigabitethernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
show ip interface vrf WORD<1-16>
show ip interface vrfids WORD<0-512>
None
User EXEC
The show ip interface command displays the following information:
Output field |
Description |
---|---|
INTERFACE |
Indicates the slot and port for the management port. |
IP ADDRESS |
Indicates the IP address for the management port. |
NET MASK |
Indicates a subnet mask of an IP address. |
BCASTADDR FORMAT |
Indicates the broadcast address format for the management port. |
REASM MAXSIZE |
Indicates the size of the largest IP packet that can be reassembled from IP fragmented packets received on the management port. |
VLAN ID |
Indicates the VLAN ID of the management port. |
BROUTER PORT |
Indicates whether the management port is a brouter port or a routeable VLAN. |
IPSEC STATE |
Indicates whether the IPsec policy is enabled on the interface. |
IP NAME |
Indicates the IP name given to the IP address. |
The following example displays the command output.
Switch:1>show ip interface ========================================================================================== IP Interface - GlobalRouter ========================================================================================== INTERFACE IP NET BCASTADDR REASM VLAN BROUTER IPSEC IP ADDRESS MASK FORMAT MAXSIZE ID PORT STATE NAME ------------------------------------------------------------------------------------------ Clip1 1.2.3.4 255.255.0.0 ones 1500 -- false disable testing123 Clip2 2.3.4.5 255.255.255.0 ones 1500 -- false disable testing451 All 2 out of 2 Total Num of IP interfaces displayed