show ipv6 neighbor
View entries in the neighbor cache.
Syntax
-
show ipv6
neighbor
-
show ipv6 neighbor
interface gigbitethernet {slot/port[sub-port]}
-
show ipv6 neighbor
interface mgmtEthernet
-
show ipv6 neighbor
interface mgmtEthernet mgmt
-
show ipv6 neighbor
interface mlt <1-512>
-
show ipv6 neighbor
interface mlt <1-512> vrf WORD<1-16>
-
show ipv6 neighbor
interface mlt <1-512> vrfids WORD<0-512>
-
show ipv6 neighbor
interface vlan <1-4059>
-
show ipv6 neighbor type
<1-4>
-
show ipv6 neighbor type
<1-4> vrf WORD<1-16>
-
show ipv6 neighbor type
<1-4> vrfids WORD<0-512>
-
show ipv6 neighbor vrf
WORD<1-16>
-
show ipv6 neighbor vrfids
WORD<0-512>
-
show ipv6 neighbor
WORD<0-46>
-
show ipv6 neighbor
WORD<0-46> vrf WORD<1-16>
-
show ipv6 neighbor
WORD<0-46> vrfids WORD<0-512>
Command Parameters
- {slot/port[sub-port]}
- Identifies a single slot and port.
If your platform supports channelization and the port is channelized, you must
also specify the sub-port in the format slot/port/sub-port.
- <1-512>
- Specifies the MLT ID.
- mgmtEthernet [mgmt]
- Displays neighbor entries for a
management port.
- type <1-4>
- Specifies the type of mapping: 1:
other, 2: dynamic, 3: static, or 4: local.
- vlan <1-4059>
- Specifies the VLAN ID in the range
of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system
reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling and
SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the
default VLAN and you cannot create or delete VLAN ID 1.
- vrf WORD<1-16>
- Specifies a VRF name. The VRF
parameter is optional.
- vrfids WORD<0-512>
- Specifies a VRF by ID. The VRF
parameter is optional.
- WORD<0-46>
- Specifies the neighbor
address.
Usage Guidelines
The mgmtethernet mgmt parameter only applies to VSP 8600
Series.