show ipv6 mld group group
Displays the MLD group IPv6 address
Command Parameters
- {slot/port [-slot/port]}
- Identifies a single slot and port.
If your platform supports channelization and the port is channelized, you must
also specify the sub-port in the format slot/port/sub-port.
- detail
- Displays mldv2 specific data.
- vlan <1-4059>
- Specifies the VLAN ID in the range
of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system
reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling and
SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the
default VLAN and you cannot create or delete VLAN ID 1.
- WORD<0-255>
- Specifies the IPv6 address.
