show ipsec interface (for a VLAN)
Display the Internet Protocol Security (IPsec) information on an VLAN interface. The
command only works on an interface where you enable IPv6. If you do not enable IPv6 on the
interface, the command displays as an error to the user.
Command Parameters
- vlan <1-4059>
- Specifies the VLAN ID in the range
of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system
reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling and
SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the
default VLAN and you cannot create or delete VLAN ID 1.
