show ip igmp group

Displays information about a statically configured or dynamically learned IGMP group. If you do not specify a VRF name or range of VRF IDs, the results show information for the Global Router. If you do specify a VRF name or range of VRF IDs, the results show information only for the VRFs you specify.

Syntax

show ip igmp group
show ip igmp group group {A.B.C.D}
show ip igmp group member-subnet {A.B.C.D/X}
show ip igmp group vrf WORD<1-16>
show ip igmp group vrfids WORD<0-512>

Command Parameters

count: Specifies the number of entries.
group {A.B.C.D}: Specifies the group address.
member-subnet default |{A.B.C.D/X}: Specifies the IP address and network mask.
vrf WORD<1-16>: Specifies a VRF by name.
vrfids <0-512>: Specifies a VRF by ID.

Default

None

Command Mode

Privileged EXEC

Command Output

The following table shows the field descriptions for the show ip igmp group command.


Parameter	Description
GRPADDR	Indicates the multicast group address (Class D) that others want to join. Many incoming ports can use the same group address.
INPORT	Indicates the physical interface or a logical interface (VLAN), which received group reports from various sources.
MEMBER	Indicates the IP address of a source that sent a group report to join this group.
EXPIRATION	Indicates the minimum amount of time that remains before this entry ages out.
TYPE	Indicates whether the entry is learned dynamically or is added statically.