show ipv6 mld interface
Displays the IPv6 MLD interface information
Syntax
-
show ipv6 mld
interface
-
show ipv6 mld interface
gigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
-
show ipv6 mld interface
vlan <1-4059>
Command Parameters
- gigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
- Displays the interface
gigabitethernet MLD interface information.
{slot/port[/sub-port][-slot/port[/sub-port]][,...]} identifies the slot and port
in one of the following formats: a single slot and port (slot/port), a range of
slots and ports (slot/port-slot/port), or a series of slots and ports
(slot/port,slot/port,slot/port). If your platform supports channelization and the
port is channelized, you must also specify the sub-port in the format
slot/port/sub-port.
- vlan <1-4059>
- Displays the VLAN interface MLD
interface information. By default, VLAN IDs 1 to 4059 are configurable and the
system reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling
and SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the
default VLAN and you cannot create or delete VLAN ID 1
