show ipv6 rip interface
Displays RIPng redistribution configuration.
Command Parameters
- gigabitEthernet {slot/port[sub-port]}
- Displays interface gigabitethernet
RIPng configurations. {slot/port[sub-port]} identifies a single slot and port. If
your platform supports channelization and the port is channelized, you must also
specify the sub-port in the format slot/port/sub-port.
- vlan <1-4059>
- Displays VLAN interface RIPng
configurations. By default, VLAN IDs 1 to 4059 are configurable and the system
reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling and
SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the
default VLAN and you cannot create or delete VLAN ID 1.