You have the option to display AP power representation per chain or total power per
radio for the ExtremeWireless 11ax access
points.
The benefits of configuring power representation per chain, is to accommodate for
different radio operation modes, including low power modes, which are smaller values
than total radio power. Based on the AP Transmit Power Representation setting, the
following AP related information is affected:
Calculations and
configuration related to the operational mode or antenna configuration.
Displayed statistics and
reported values from the AP to the appliance.
To configure the AP Transmit Power Representation:
Go to Administration > System > Settings.
Scroll down to the AP Transmit Power
Representation pane.
For Configure and Report Tx
Power, select Per
Chain or Total Per
Radio.
