Captive Portal Redirect Port List

Configure a port on the ExtremeCloud IQ Controller interface to which the client is redirected after the ECP response. If ECP support is configured for HTTP then the port is typically 80, otherwise it is typically 443. It is possible to configure a different port. The hw_port attribute appears in the redirection response from ExtremeCloud IQ Controller.

1. Go to Configure > Networks > WLANS.
2. Select Enable Captive Portal.
3. Select CP Redirect Port List.
4. Select to add a port to the list.
5. To delete a port, select the port, and then select .