Always use a
restrictive policy to the associated VLAN to reduce your exposure after a
breach.
Static WEP (Wired Equivalent Privacy) uses keys for a selected network, that match
the WEP mechanism used on the rest of the network. Each AP can participate in up to
50 networks. Specify one WEP key per network.
Note
This option is offered to support
legacy APs.
Configure the following privacy settings for a WLAN
network:
WEP Key Length — Select the
WEP encryption key length. Valid values are: 64-bit and 128- bit.
Input Methods — Select one of
the following input methods:
Input Hex — If you
select Hex, type the WEP key input in the WEP Key box. The
key is generated automatically, based on the input.
Input String — If you
select String, type the secret WEP Key string used for
encrypting and decrypting in the WEP Key box.
Key Index — Select the WEP
encryption key index. Valid values are 1 to 4.
WEP Key — Type the WEP key
using the Input
Method chosen above.
