License Details

From the License Details tab, you can determine the licensed status of the controller, install the Activation Package or Air Gap file, and synchronize the controller with the license server.

The License Details tab provides the following information about the controller:

License Server Status

When in connected mode, this icon indicates the licensed state of the controller:

Green indicates that the controller is in compliance with the license.
Red indicates that the controller is not in compliance with the license or that there is a connectivity issue between the controller and the licensing server.

When appropriate, the following additional information is displayed:

Current status of the grace period.
Entitlements have expired.
Number of devices exceed the licensed entitlements.
Assigned entitlements are approaching expiration.

When in air gap mode, the License Server Status is Air-Gap.

Note

If internet access is not available for continuous connectivity to the cloud server, you can install an air gap licensing file that is generated from the Extreme Networks Support Portal.

From the License Details tab, select Switch to Air Gap Licensing to install the air gap file.

Daily Scheduled Sync

When in connected mode, the time of day when the controller is automatically synchronized with the LEM server. This synchronization occurs every 24 hours. It is a static timestamp that is determined by the controller boot time.

To synchronize the controller with the LEM server on demand, select Synchronize Now.

Regulatory Domain

The regulatory domain of the controller. This value is World Wide.

Locking ID (Serial Number)

The serial number of the controller. This is also the controller Locking ID.

MAC Address

The MAC Address of the controller.

Licensed Capacity

The number of used licenses. This number should match the total number of Managed Devices. To ensure that you are viewing the latest license information, select Synchronize Now.

Managed Devices

The number of devices that are managed by the controller. This number should match the Licensed Capacity. To ensure you are viewing the latest license information, select Synchronize Now.

System Limits

Indicates the maximum device limits per controller.

PKI Certificates

Indicates if a PKI (Public Key Infrastructure) Certificate is installed and verified. A PKI Certificate is required to onboard the controller to ExtremeCloud IQ.

The hardware appliances and access points have Extreme CA certificates installed. Also, both a temporary and permanent subscription license for a virtual controller includes a PKI Certificate. For information about certificates, see Certificates.

Note

Cloud connectivity (

) is indicated on the product banner. For more information, see Cloud Visibility.