The following rules apply to AP310e and AP360e antenna installation:
Group 1 (2.4 GHz/5 GHz)
accepts identical dual-band antennas.
Group 2 (5 GHz) accepts
identical 5 GHz or dual-band antennas.
Antennas must
be configured consecutively for each group. Group 1 starts with Port 1/Group
1 and Group 2 starts with Port 3/Group 2. An equal number of antennas must
be configured for both groups. For example, to support a 2x2 deployment,
install Group 1 and Group 2 — 2 antennas each.
Mode 1. Radios 1 and 2 are
enabled when:
Both groups of
antennas must be configured. Radio 1 is enabled only if one or more
antennas are configured in Group 1. Radio 2 is enabled only if one
or more antennas are configured in Group 2.
Mode 2. Radio 1
is a 2.4/5 GHz sensor and Radio 2 forwards traffic.
Radio 1 dual-band
sensor is enabled only if one or more antennas are configured in
Group 1.
Radio 2 5 GHz WLAN
service is enabled only if one or more antennas are configured in
Group 2.
Mode 3. Radios are configured
Dual 5 GHz mode.
Radio 1 is enabled
only if one or more antennas are configured in Group 1.
Radio 2 is enabled
only if one or more antennas are configured in Group 2.
