Configure a Mesh Point Network

  1. Configure the mesh point.
    Go to Configure > Networks > Mesh Points > Add and configure the Mesh Point Network Settings.
  2. Associate the mesh point network with the device group configuration Profile.
    1. Go to Sites, and select a site.
    2. Select the Device Groups tab, and select a specific device group.
    3. Next to the Profile field, select .
    4. Select the Mesh Points tab, and select the mesh point network for a single radio.
      Note

      Note

      The access points are limited to one mesh point. Multiple radios can be configured for a single mesh point.
  3. Select Advanced and configure the Mesh Device Settings in the configuration Profile. See Advanced Configuration and Mesh Device Settings.
Note

Note

Mesh device settings are supported at the Profile level or configured as an override for a specific AP.
9038114-00 Rev. AB