Configuring a Multicast Rule

  1. Go to Policy > VLANS > Add, or select a VLAN.
  2. Select Add New Rule.
  3. Configure the following parameters:
    IP address
    Enter the multicast IP address for the traffic destination.
    CIDR
    Classless Inter-Domain Routing. An address aggregation scheme that uses supernet addresses to represent multiple IP destinations.
    Wireless Replication
    Enables the forwarding of multicast traffic from a wireless client to other wireless clients. If disabled, multicast traffic from wireless clients is forwarded to wired clients only. Wireless clients will not receive it.
    Group
    Indicates the multicast group associated with the rule. Multicast is a communication pattern in which a source host sends a message to a group of destination hosts.