Install the ML-2452-SEC6M4-036 Antenna

About this task

The ML-2452-SEC6M4-036 antenna is mounted to a wall.

ML-2452-SEC6M4-036 antenna box contents:
  • A wall mount kit, that includes:
    • Four plastic wall insert plugs
    • Four self-tapping screws
    • Four flat washers
  • One ML-2452-SEC6M4-036 antenna
  • One wall mount instructions sheet
  • One Waste Electrical and Electronic Equipment (WEEE) document
  • One China RoHS sheet

Procedure

  1. Using the ML-2452-SEC6M4-036 antenna holes as a template, mark and drill four, 5 × 35 mm holes on a wall.
    Click to expand in new window
    Antenna mounting holes
    Callout Description
    A Antenna hole templates for wall mount installation
  2. Insert four plastic wall insert plugs into the mounting holes.
  3. Place a flat washer on every antenna mounting hole template, and insert the self tapping screw through the flat washer.
    Click to expand in new window
    Callout Description
    A Self tapping screw
    B Flat washer
    Note

    Note

    Antenna cables are not shown in the antenna images.
  4. Insert the self tapping screws into the plastic wall insert plugs, and tighten the screws.
    Click to expand in new window
    Self tapping screws inserted into the plastic wall insert plugs
9036524-10 Rev AB