Radius Configuration
A single Site
definition can be configured with one or two RADIUS servers. The RADIUS servers assigned
to a Site can only be selected from the list of servers displayed on the RADIUS Configuration dialog.
To select site RADIUS servers:
- From the
Configuration tab, under RADIUS Server used, click Configure. The RADIUS Configuration
dialog displays.
- Select a
RADIUS server from the list of available servers and click the right-arrow
button.
The server will be moved under the RADIUS Servers used list.
- Click the
Move Up or Move Down buttons to change
the order of the RADIUS Servers used.
- Click the Advanced button. The
RADIUS Advanced
Configuration dialog appears.
- The
following values can be edited:
- NAS
IP Address — Click the checkbox to use the existing IP address of the
VNS server, or enter an alternate IP Address in the box provided.
- NAS
Identifier — Click the checkbox to use the name of the existing VNS
server, or enter an alternate name in the box provided.
- Auth. type — Select an authorization protocol from the drop-down list
(PAP, CHAP, MS-CHAP, or MS-CHAP2).
- Password — To override the default password (see VNS Global Settings) for MBA -
MAC Based authorization only. Select Mask to display the password, and
select Unmask to hide the entry.
- Click
Close.