Configuring SNMPv1/v2c-specific Parameters

  1. Configure the following parameters on the SNMPv1/v2c tab:
    • Read Community Name — The password that is used for read-only SNMP communication.
    • Read/Write Community Name — The password that is used for write SNMP communication.
    • Manager A — The IP address of the server used as the primary network manager that will receive SNMP messages.
    • Manager B — The IP address of the server used as the secondary network manager that will receive SNMP messages.
      Note

      Note

      Manager A and Manager B address fields support both IPv4 or IPv6 addresses.
  2. Click Save.