Configuring Common Configuration Default AP Settings
To configure common
configuration default AP settings:
-
From the top menu, click
AP.
-
In the left pane, click
.
The
Common Configuration tab is displayed.
Note
Ports 1, 2, and 3, are available on
the AP3912 only.
-
In the
Static Configuration section, you
can specify an EWC search list or use the search
list provided from the AP. Do one of the following:
Check
Learn EWC Search List from
AP to accept the AP's search list, or
clear the checkbox to specify a common search list for all APs. For more information
about creating
an EWC Search List, see
Static Configuration Properties.
- In the WLAN Assignments section, you can associate a WLAN assignment to a
radio.
- If the
controller is in an availability pair, you can apply default WLAN assignments to
foreign APs, by selecting the Apply
default WLAN assignments to foreign APs checkbox. For more
information, see Availability.
- To associate a WLAN Service in the list to a radio and or a wired port, select
the checkbox matching the radio and or port for the selected WLAN.
- A WLAN service can be assigned to one or more radios
and ports. A client port can be assigned to only one WLAN service. The
assignment enables the port.
- One policy definition for wired and wireless users. Users
on wired ports receive the same default policy.
- Wireless and wired users associated to the same WLAN
service and receive identical service. They are affected by the same
policies and filters.
- ExtremeWireless v10.21.02 limits wired
port assignment to open WLAN services, MBA, and captive portal.
- Click Save
Settings.