Configuring Basic Captive Portal Settings

1. From the top menu, click VNS.
2. In the left pane expand the WLAN Services pane, then click the WLAN Service. The WLAN Services configuration page is displayed.
3. Click the Auth & Acct tab.
   

   Configuring Basic Captive Portal

   
4. In the Authentication Mode drop-down list, select a Captive Portal option.
   • Disabled
   • 802.1x
   • Internal
   • External
   • Firewall Friendly External
   • Guest Portal
     

     Note

     You must configure a Guest Portal before Guest Portal appears as a Captive Portal option. Only one WLANS on a VNS can be configured for Guest Portal.
   • Guest Splash
5. Click Configure.
   The Captive Portal configuration page displays. The page display differs depending on the mode that you have selected:

   • Internal and Splash modes, see Configuring Internal Captive Portal and Guest Splash
   • External and 802.1x modes, see Configuring External and Mode 802.1 Captive Portal
   • Guest Portal mode, see Configuring Guest Portal
   • Firewall Friendly External Captive Portal mode, see Configuring Firewall Friendly External Captive Portal.