ipv6
Configures the internal captive portal server‘s (running on the
centralized mode) IPv6 address. If using centralized server mode, use this option to define
the controller, service platform, or access point resource‘s (hosting the captive portal)
IPv6 address. For information on configuring the server mode, see server.
Supported on the following devices:
- Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Syntax
ipv6 server host <IPv6>
Parameters
ipv6 server host <IPv6>
| ipv6 server host <IPv6> |
Configures the IPv6 address of the internal captive
portal server
- <IPv6> – Specify the captive portal server‘s global IPv6 address.
|
Examples
rfs4000-229D58(config-captive-portal-test2)#ipv6 server host 2001:10:10:10:6d:33:fa:8b
rfs4000-229D58(config-captive-portal-test2)#show context
captive-portal test2
access-type OAuth
ipv6 server host 2001:10:10:10:6d:33:fa:8b
OAuth client-id Google TechPubs.printer.google.com
rfs4000-229D58(config-captive-portal-test2)#
Related Commands
| no |
Removes the captive portal server‘s IPv6 address |
