ns-interval
Configures the NS
(neighbor solicitation) retransmit timer value advertised
in RAs. This is the interval between two successive NS messages. When
specified, it enables the sending of the specified value in RAs. This
feature is disabled by default.
Supported on the following devices:
- Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Syntax
ns-interval [<1000-3600000>|global]
Parameters
ns-interval [<1000-3600000>|global]
| ns-interval [<1000-3600000>|global] |
Configures the NS interval advertised in RAs. Use one of
the following options:
- <1000-3600000> – Specify a value from 1000 - 3600000 milliseconds. The
default is 1000 milliseconds.
- global –
Advertises the NS interval configured for the system. This
is configured on the device in the device configuration
mode. For more information, see ipv6 (profile config mode).
|
Examples
nx9500-6C8809nx9500-6C8809(config-ipv6-radv-policy-test)#ns-interval 3000
nx9500-6C8809(config-ipv6-radv-policy-test)#show context
ipv6-router-advertisement-policy test
managed-config-flag
nd-reachable-time global
ns-interval 3000
advertise mtu
advertise hop-limit
check-ra-consistency
dns-server 2002::2 lifetime 3000
domain-name TechPubs lifetime infinite
nx9500-6C8809(config-ipv6-radv-policy-test)#
