level

Configures the global MiNT routing level

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

level 2 area-id <1-16777215>

Parameters

level 2 area-id <1-16777215>


level 2	Configures level 2 inter-site MiNT routing
area-id <1-16777215>	Configures the routing area identifier <1-1677215> – Specify a value from 1 - 16777215. The level 2 area ID is the global MiNT area identifier. This area identifier separates two overlapping MiNT networks . Configure the level 2 area ID only if there are two MiNT networks sharing the same packet broadcast domain.

Examples

nx9500-6C8809(config-mint-policy-global-default)#level 2 area-id 2000

nx9500-6C8809(config-mint-policy-global-default)#show context
mint-policy global-default
 level 2 area-id 2000
nx9500-6C8809(config-mint-policy-global-default)#

Related Commands


no	Disables level 2 MiNT packet routing (inter-site packet routing)