traffic-source

Configures the traffic source tunneled by this session

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

traffic-source vlan <VLAN-ID-RANGE> {native-vlan <1-4094>}

Parameters

traffic-source vlan <VLAN-ID-RANGE> {native-vlan <1-4094>}


traffic-source vlan <VLAN-ID-RANGE>	Configures VLAN as the traffic source for this tunnel <VLAN-ID-RANGE> – Configures VLAN range list of traffic source. Specify the VLAN IDs as a range (for example, 10-20, 25, 30-35)
native-vlan <1-4094>	Optional – Configures the native VLAN ID for this session, which is not tagged <1-4094> – Specify the native VLAN ID from 1- 4094.

Examples

nx9500-6C8809(config-profile default-nx5500-l2tpv3-manual-session-test)#traffic-source vlan 50-60 native-vlan 2

nx9500-6C8809(config-profile default-nx5500-l2tpv3-manual-session-test)#show context
 l2tpv3 manual-session test
  local-ip-address 1.2.3.4
  peer ip-address 5.6.7.8 udp port 150
  traffic-source vlan 50-60 native-vlan 2
  local-session-id 1
  remote-session-id 200
  remote-cookie size 8 400 700
nx9500-6C8809(config-profile default-nx5500-l2tpv3-manual-session-test)#

Related Commands


no	Removes the traffic source configured for a manual session