debug ip pim

Enables debugging for IP Protocol Independent Multicast.

Syntax

debug ip pim { add-del-oif | bootstrap | group | join-prune | nbr-change | packets | parent | regproc | route-change | rp | source | state | all }

no debug ip pim all

Command Default

All flags are disabled.

Parameters

add-del-oif: Controls the OIF change flag.
bootstrap: Controls the bootstrap processing flag.
group: Controls the processing for a group flag.
join-prune: Controls the Join/Prune processing flag.
nbr-change: Controls the neighbor changes flag.
packets: Controls the packet processing flag.
parent: Controls the parent change processing flag.
regproc: Controls the register processing flag.
route-change: Controls the route changes flag.
rp: Controls the Rendezvous Point (RP) processing flag.
source: Controls the processing for a source flag.
state: Controls the state processing flag.
all: Controls all of the states.

Modes

Privileged EXEC mode

Usage Guidelines

Diagnostic commands are developed and intended for specialized troubleshooting. Work closely with Extreme Networks technical support when running debug or show system internal commands and interpreting their results.

Use the no debug ip pim all command to disable debugging.