rmon alarm

Sets the RMON alarm conditions.

Syntax

rmon alarm index snmp_oid interval seconds [ absolute | delta ] rising-threshold value event number [ falling-threshold value event number [ owner name ]

no rmon alarm

Command Default

No alarms are configured.

Parameters

index

Specifies the RMON alarm index. Valid values range from 1 through 65535.

snmp_oid

Specifies the MIB object to monitor. The variable must be in the SNMP OID format, for example, 1.3.6.1.2.1.16.1.1.1.5.65535. The object type must be a counter32.

interval seconds

Specifies the RMON alarm sample interval in seconds. Valid values range from 1 through 2147483648.

absolute

Sets the sample type as absolute.

delta

Sets the sample type as delta.

rising-threshold value: Specifies the RMON alarm rising threshold. Valid values range from 0 through 4294967295.
event number: Specifies the event for the rising alarm. Valid values range from 1 through 65535.
falling-threshold value: Specifies the RMON alarm falling threshold. Valid values range from 0 through 4294967295.
event number: Specifies the event for the rising alarm. Valid values range from 1 through 65535.
owner name: Specifies the identity of the owner. The maximum number of characters is 32.

Modes

Global configuration mode

Usage Guidelines

Enter no rmon alarm to disable the alarm conditions.

Examples

To set RMON alarm conditions:

device# configure terminal
device(config)# rmon alarm 100 1.3.6.1.2.1.16.1.1.1.5.65535 interval 5 absolute rising-threshold 10000 event 100 falling-threshold 1000 event 101 owner admin