show ipv6 bgp

Displays BGP4+ route information.

Syntax

show ipv6 bgp

show ipv6 bgp ipv6-addr [ /prefix ]

show ipv6 bgp ipv6-addr [ /prefix ] [ longer-prefixes ] [ vrf vrf-name ]

Parameters

ipv6-addr: IPv6 address of a neighbor in dotted-decimal notation, with optional mask.
/prefix: IPv6 mask length in CIDR notation.
longer-prefixes: Filters on prefixes equal to or greater than that specified by prefix.

vrf vrf-name: Specifies a VRF instance.

Modes

Privileged EXEC mode

Examples

This example displays sample output from the show ipv6 bgp command.

device# show ipv6 bgp
Total number of BGP Routes: 1 
Status codes: s suppressed, d damped, h history, * valid, > best, i internal, S stale, x best-external 
Origin codes: i - IGP, e - EGP, ? - incomplete RPKI State: V - VALID, I - INVALID, N - NOT FOUND ? - Unknown Network Next Hop MED LocPrf Weight 
RPKI State Path *>x 2000:2000::2000/128 5555::2 0 100 0 N (4200000002) 4200000004 i

Network            	Next Hop       MED       LocPrf   Weight   RPKI 	State Path
*>x 2000:2000::2000/128  5555::2 	0          100        0      N          (4200000002) 4200000004 i