debug ipv6 pim

Enables IPv6 PIM debug flags.

Syntax

debug ipv6 pim { add-del-oif | bootstrap | group | join-prune | nbr-change | packets | parent | regproc | route-change | rp | source | state | all }

no debug ipv6 pim { add-del-oif | bootstrap | group | join-prune | nbr-change | packets | parent | regproc | route-change | rp | source | state | all }

Command Default

By default, all debug flags are disabled.

Parameters

add-del-oif: Controls the OIF change flag.
bootstrap: Controls the bootstrap processing flag.
group: Controls the group processing flag.
join-prune: Controls the Join/Prune processing flag.
nbr-change: Controls the neighbor changes flag.
packets: Controls the packet processing flag.
parent: Controls the parent change processing flag.
regproc: Controls the register processing flag.
route-change: Controls the route changes flag.
rp: Controls the Rendezvous Point (RP) processing flag.
source: Controls the source processing flag.
state: Controls the state processing flag.
all: Controls the state of all the flags.

Modes

Privileged EXEC mode

Usage Guidelines

Diagnostic commands are developed and intended for specialized troubleshooting. Work closely with Extreme Networks technical support when running debug or show system internal commands and interpreting their results.

The no debug ipv6 pim all form of the command disables all debug flags.

Examples

This example shows enables all debug flags.

device# debug ipv6 pim all

This example disables the Rendezvous Point flag.

device# no debug ipv6 pim rp