debug ipv6 mld

Enables IPv6 MLD debug flags.

Syntax

debug ipv6 mld { errors | group | interface | l2-port | packet | rx | tx | vlan | all }

no debug ipv6 mld { errors | group | interface | l2-port | packet | rx |tx | vlan | all }

Command Default

By default, all debug flags are disabled.

Parameters

errors: Controls the error change flag.
group: Controls the multicast group processing flag.
interface: Controls the interface processing flag.
l2-port: Controls the Layer 2 port processing flag.
packet: Controls the packet processing flag.
rx: Controls the packet received processing flag.
tx: Controls the packet transmitted processing flag.
vlan: Controls the VLAN interface processing flag.
all: Controls the state of all the flags.

Modes

Privileged EXEC mode

Usage Guidelines

Diagnostic commands are developed and intended for specialized troubleshooting. Work closely with Extreme Networks technical support when running debug or show system internal commands and interpreting their results.

The no debug ipv6 mld all form of the command disables all debug flags.

Examples

The following example shows the syntax for enabling all debug flags.

device# debug ipv6 mld all

The following example shows the syntax for disabling the interface flag.

device# no debug ipv6 mld interface