encryption-type

Selects the encryption type for this user-defined role. Encryption ensures privacy between Access Points and wireless clients. There are various modes of encrypting communication on a WLAN, such as CCMP (Counter-model CBC-MAC Protocol), WEP (Wired Equivalent Privacy), keyguard, TKIP (Temporal Key Integrity Protocol), etc.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

encryption-type [any|eq|neq]

encryption-type any

encryption-type [eq|neq] [ccmp|keyguard|none|tkip|wep128|wep64] 
(ccmp|keyguard|none|tkip|tkip-ccmp|wep128|wep64)}

Parameters

encryption-type any


any	The encryption type can be any one of the listed options (ccmp\|keyguard\|tkip\|wep128\|wep64). This is the default setting.

encryption-type [eq|neq] [ccmp|keyguard|none|tkip|wep128|wep64] 
(ccmp|keyguard|none|tkip|tkip-ccmp|wep128|wep64)}


eq [ccmp\|keyguard\|none\| \|wep128\|wep64]	The role is applied only if the encryption type equals to one of the following options: ccmp: Encryption mode is CCMP keyguard: Encryption mode is keyguard. Keyguard encryption shields the master encryption keys from being discovered none: No encryption mode specified tkip – Encryption mode is TKIP wep128: Encryption mode is WEP128 wep64: Encryption mode is WEP64 Note: These parameters are recursive, and you can configure more than one encryption type for this user-defined role.
neq [ccmp\|keyguard\|none\| wep128\|wep64]	The role is applied only if encryption type is not equal to any of the following options: ccmp: Encryption mode is not equal to CCMP keyguard: Encryption mode is not equal to keyguard none: Encryption mode is not equal to none tkip – Encryption mode is not equal to TKIP wep128: Encryption mode is not equal to WEP128 wep64: Encryption mode is not equal to WEP64 Note: These parameters are recursive, and you can configure more than one ‘not equal to‘ encryption type for this user-defined role.

Examples

nx9500-6C8809(config-role-policy-test-user-role-testing)#encryption-type eq wep128

nx9500-6C8809(config-role-policy-test-user-role-testing)#show context
 user-role testing precedence 10
  authentication-type eq kerberos
  encryption-type eq wep128
  ap-location contains office
  captive-portal authentication-state pre-login
  city exact SanJose
  company exact ExampleCompany
  country exact America
  department exact TnV
  emailid exact testing@examplecompany.com
  employeeid contains TnVTest1
nx9500-6C8809(config-role-policy-test-user-role-testing)#

Related Commands


no	Removes the encryption type configured for this user-defined role