detection-threshold

Specifies the detection-threshold determining when a client is monitored

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

detection-threshold <-100--40>

Parameters

detection-threshold <-100--40>


detection-threshold <-100--40>	Configures the detection threshold value determining when a client is monitored. The clients with bad RSSI values are monitored more frequently. <-100--40> – Specify the RSSI value from -100 dBm - -40 dBm. The default is -75 dBm.

Examples

nx9500-6C8809(config-roaming-assist-policy-test)#detection-threshold -90

nx9500-6C8809(config-roaming-assist-policy-test)#show context
roaming-assist-policy test
 aggressiveness medium-high
 detection-threshold -90
 action log
nx9500-6C8809(config-roaming-assist-policy-test)#

Related Commands


no	Removes the configured detection threshold details