| Command | Description |
|---|---|
| aaa-login | Configures login authentication settings |
| allowed-locations | Configures a user-role based access control to RF Domains and locations |
| banner | Configures the message of the day (MOTD) text |
| flash-ui | Enables the Flash user interface (UI) on the device |
| ftp | Enables FTP on this management policy |
| http | Enables HTTP on this management policy |
| https | Enables HTTPS on this management policy |
| idle-session-timeout | Sets the interval after which an idle session is terminated |
| ipv6 (management-policy) | Restricts management access to specified hosts and/or subnets based on their IPv6 addresses and prefixes respectively |
| nova | Enables new HTML5 user interface |
| password-entry | Configures user-account lockout and unlock parameters |
| privilege-mode-password | Configures the CLI‘s privilege mode access password |
| rest-server (management-policy) | Enables the Representational State Transfer (REST) server to facilitate device on-boarding |
| restrict-access | Restricts management access to a set of hosts or subnets |
| snmp-server | Sets the SNMP server settings on this management policy |
| ssh | Enables SSH on this management policy |
| t5 (management-policy) | Configures SNMP server settings for T5 devices on this management policy. This command is available only NX9500 and NX9600 platforms. |
| telnet | Enables Telnet on this management policy |
| user (management-policy) | Creates a new user account |
| service | Invokes service commands to troubleshoot or debug (config-if) instance configurations |
| no (management-policy) | Removes or resets this management policy‘s settings |
Note
For more information on common commands (clrscr, commit, help, revert, service, show, write, and exit), see Common Commands.Note
The input parameter <HOSTNAME>, wherever used in syntaxes across this chapter, cannot include an underscore (_) character. In other words, the name of a device cannot contain an underscore.