TM-CLK Clock Module

The TM-CLK Clock Module provides an Oven-controlled Crystal Oscillator (OCXO) for use as a reference frequency for SyncE and 1588v2 precision time features. The OCXO is precise to +-2 nanoseconds (ns) with time accuracy +50 to -65 ns. The ExtremeXOS configuration selects the input to the clock module from a SyncE master port or a 1588v2 grandmaster clock. The TM-CLK module is required for SyncE on the X460-G2. The 1588v2 Precision Time feature on the X460-G2 requires the TM-CLK module and the Network Timing Feature Pack, and does not support stacking.

Two mini-BNC outputs deliver the following signals:
Caution

Caution

The clock module is not hot swappable. You must power down the switch before installing any VIM modules.
Note

Note

The TM-CLK module has no inputs for timing signals, and it cannot act as a 1588v2 grandmaster clock. The module provides no RJ45 Building Integrated Timing System (BITS) output, and in particular does not provide the serial time of day output.
Note

Note

The X460-G2 TM-CLK clock module does not accept both 10MHz and 1PPS signals at the same time, so it can take 10 to 20 minutes or more to lock onto a 1588v2 1PPS signal from the Apollo2 chip in addition to the usual 15 minutes or more for the 1588v2 servo to lock onto the remote grandmaster clock.
Click to expand in new window
TM-CLK Module Option
1 = Timing signal mini-BNC outputs