ExtremeSwitching X435 Series Switches Technical Specifications

The ExtremeSwitching X435 series includes the following switches:

X435-8T-4S switch
X435-8P-4S switch
X435-8P-2T-W switch
X435-24T-4S switch
X435-24P-4S switch

Table 1. X435 Unpackaged Dimensions
X435-8T-4S switch X435-8P-4S switch	Height: 1.71 inches (4.34 cm) Width: 12.6 inches (32.0 cm) Length: 7.9 inches (20.06 cm)
X435-8P-2T-W switch	Height: 1.73 inches (4.39 cm) Width: 8.2 inches (20.82 cm) Length: 10.1 inches (25.65 cm)
X435-24T-4S switch X435-24P-4S switch	Height: 1.73 inches (4.39 cm) Width: 17.4 inches (44.19 cm) Length: 10.0 inches (25.4 cm)

Table 2. X435 Unpackaged Weight (With Blanks; No PSU or Fan Module)
X435-8T-4S switch	4.12 lb (1.87 kg)
X435-8P-4S switch	4.85 lb (2.2 kg)
X435-8P-2T-W switch	3.15 lb (1.43 kg)
X435-24T-4S switch	6.5 lb (2.95 kg)
X435-24P-4S switch	7.67 lb (3.48 kg)

Table 3. X435 Packaged Dimensions
X435-8T-4S switch X435-8P-4S switch X435-8P-2T-W switch	Height: 5.24 inches (13.3 cm) Width: 16.78 inches (42.6 cm) Length: 12.73 inches (32.3 cm)
X435-24T-4S switch X435-24P-4S switch	Height: 5.20 inches (13.2 cm) Width: 22.18 inches (56.3 cm) Length: 15.13 inches (38.4 cm)

Table 4. X435 Packaged Weight (No PSU or Fan Module)
X435-8T-4S switch	6 lb (2.72 kg)
X435-8P-4S switch	6.72 lb (3.05 kg)
X435-8P-2T-W switch	4.41 lb (2 kg)
X435-24T-4S switch	8.86 lb (4.02 kg)
X435-24P-4S switch	10.03 (4.55 kg)

Power Options

Table 5. X435 Power Supply Options
Switch Model	Nominal input ratings
X435-8T-4S switch	100 to 240 V, 50-60 Hz, 0.7 A
X435-8P-4S switch	100 to 240 V, 50-60 Hz, 3 A
X435-8P-2T-W switch	802.3bt PD input power 46-57VDC 1.8AX2: PoE ports load to 0W, 25W, or 45W for 1 input PoE ports load to 25W, 65W, or 100W for 2 inputs
X435-24T-4S switch	100 to 240 V, 50-60 Hz, 0.7 A
X435-24P-4S switch	100 to 240 V, 50-60 Hz, 6 A

Table 6. Power Cords
Extreme Networks equipment does not ship with power cords. Click the following link for locating the correct power cord for purchase and use on specific Extreme Networks equipment. Specifications for power cords in each country are also provided within this link allowing end user to purchase cords locally. www.extremenetworks.com/product/powercords/

Table 7. X435 PoE Power Budget
Switch Model	Max PoE Budget
X435-8P-4S	124W
X435-8P-2T-W	100W*
X435-24P-4S	370W

* See the following table:

Table 8. X435-8P-2T-W PoE Power Budget
Source Wattage (P9 + P10)	Output (W)
0+0	0W
30+0	0W
60+0	25W
90+0	45W
0+30	0W
30+30	25W
60+30	45W
90+30	65W
0+60	25W
30+60	45W
60+60	65W
90+60	85W
0+90	45W
30+90	65W
60+90	85W
90+90	100W

Table 9. CPU, Memory
CPU/Memory
ARM Cortex A9, 1.2 GHz CPU
512MB DDR3 memory
128MB Flash Memory
512KB packet buffer per chip

Standards and Environmental Data

Table 10. Safety Standards
North American Safety of ITE	UL 60950-1 2nd Ed., A2:2014 (US) CSA 22.2 No. 60950-1-07 2nd Ed. 2014-10(Canada) Complies with FCC 21CFR 1040.10 (US Laser Safety) CDRH Letter of Approval (US FDA Approval)
European Safety of ITE	IEC 60950-1:2005 2nd+A1:2009+A2:2013 IEC 60950-1:2006+A11+A1+A12+A2 EN 60825-1:2007 (Lasers Safety)
International Safety of ITE	CB Report & Certificate per IEC 60950-1:2005 2nd Ed., + National Differences AS/NZX 60950-1 (Australia /New Zealand)

Table 11. EMI/EMC Standards
North America EMC for ITE	FCC CFR 47 part 15 Class A (USA) ICES-003 Class A (Canada)
European EMC standards	EN 55032: 2015, Class A EN 55024:1998+A1:2001+A2:2003 EN 55035:2017 (Multimedia Equipment Immunity) Class A includes IEC 61000-4-2, 3, 4, 5, 6, 11 EN 61000-3-2: 2006+A2:2009 (Harmonics) EN 61000-3-3:2008 (Flicker) ETSI EN 300 386: v1.4.1 (2008-04) (EMC Telecommunications) 2014/35/EU Low Voltage Directive
International EMC certifications	CISPR 32: 2015, Class A (International Emissions) EN 55024:1998+A1:2001+A2:2003 Class A (International Immunity) IEC/EN 61000-4-2:2008 Electrostatic Discharge, 8kV Contact, 15 kV Air, Criteria A IEC/EN 61000-4-3:2008 Radiated Immunity 10V/m, Criteria IEC/EN 61000-4-4:2004 Transient Burst, 1 kV, Criteria A IEC/EN 61000-4-5:2005 Surge, 2 kV L-L, 2 kV L-G, Level 3, Criteria A IEC/EN 61000-4-6:2008 Conducted Immunity, 0.15-80 MHz, 10V/m unmod. RMS, Criteria A IEC/EN 61000-4-11:2004 Power Dips & Interruptions, >30%, 25 periods, Criteria C
Country-specific	VCCI Class A (Japan Emissions) BSMI (Taiwan Emissions) ACMA (C-Tick) (Australia Emissions) CCC Mark (China) KCC Mark, EMC Approval (Korea)

Table 12. Telecom Standards
	EN/ETSI 300 386:2008 (EMC Telecommunications) EN/ETSI 300 019 (Environmental for Telecommunications) MEF9 and MEF14 certified for EPL, EVPL, and ELAN

Table 13. IEEE 802.3 Media Access Standards
	IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X IEEE 802.3ae 10GBASE-X IEEE 802.3ba 40GBASE-X IEEE 802.3bz 2.5GBASE-T and 5GBASE-T (for X460-G2-16mp-32p-10GE4) IEEE 802.3at PoE Plus IEEE 802.3az (EEE)

Table 14. Environmental Data
Environmental standards	EN/ETSI 300 019-2-1 v2.1.2 (2000 - 2009) - Class 1.2 Storage EN/ETSI 300 019-2-2 v2.1.2 (1999 - 09) - Class 2.3 Transportation EN/ETSI 300 019-2-3 v2.1.2 (2003 - 04) - Class 3.1e Operational EN/ETSI 300 753 (1997-10) - Acoustic Noise ASTM D3580 Random Vibration Unpackaged 1.5G
Operating conditions	Temperature range: 0°C to 40°C (32°F to 104°F) up to 3000 m (9,842 ft.) for X435-8T/8P-4S, and X435-8P-2T-W 0°C to 45°C (32°F to 113°F) up to 3000 m (9,842 ft) for X435-24T/24P-4S Humidity: 10% to 93% relative humidity, non-condensing Altitude: 0 to 3,000 meters (9,842 feet) Operational shock (half sine): 30 m/s² (3 G), 11 ms, 60 shocks Operational random vibration: 3 to 500 Hz at 1.5 G rms
Storage & transportation conditions (packaged)	Transportation temperature: -40°C to 70°C (-40°F to 158°F) Storage and transportation humidity: 10% to 93% relative humidity, non-condensing Packaged shock (half sine): 180 m/s² (18 G), 6 ms, 600 shocks Packaged sine vibration: 5 to 62 Hz at velocity 5 mm/s, 62 to 500 Hz at 0.2 G Packaged random vibration: 5 to 20 Hz at 1.0 ASD w/–3 dB/oct. from 20 to 200 Hz 14 drops minimum on sides and corners at 42 inches (<15 kg box)

121137-05 Rev. 03